skip to main content

WIZ-QS+

Whitelight Single Fiber Interferometer for inspection of single fiber connectors, ferrules, bare fibers (both PC and APC) in production environment

The device connects to a laptop or desktop computer via USB 3.0 cable and 12V DC power adapter and is supplied with Sumix MaxInspect™ software for interferometric inspection of fiber optic connectors.

Download WIZ-QS+ brochure

Features and Benefits

Suitable for volume production

Save time with easy ferrule/connector insertion and fixture handling.

Fast measurements

Measure single fiber connectors and ferrules as quickly as 1.8 seconds with USB 3.0 SuperSpeed connection.

Factory precision-aligned fixtures

Be free of the necessity to calibrate your fixtures before each use or when changing between fixtures.

Autofocus

Minimize operator’s actions to just one click.

Wide range of applications

Inspect single fiber connectors, ferrules, bare fibers, Arinc, MS termini, both PC and APC.

One-click operation

Save time testing large quantities of connectors in Express Mode.

Customizable administrator and user levels

Tune inspection process as per your requirements.

Compliance with industry standards

Verify radius of curvature, apex offset, fiber height and other parameters per IEC, Telcordia or your own Pass/Fail criteria.

Interactive 2D and 3D surface profiles

Rotate, zoom, scale images to explore surface details as small as 2.7 µm.

Convenient test results management

Retrieve reports for any connector, filter or examine statistics any time.

Specification

Field of view
D = 0.75 mm
Lateral resolution
2.7 µm
Best suitable for connectors/ferrules
ST, FC, SC, MU, LC, E2000, Arinc, MS termini - PC and APC
Measurement mode
phase shift and white light
Scanning and calculation speed
1.8 sec*
Maximum image size
1600 × 1200 px
Power supply
external, USB 3.0 cable, 12 V DC power adapter
Weight
3.9 kg (8.6 lbs)
Dimensions (H × W × L)
150 × 120 × 90 mm (5.9 × 4.72 × 3.5 in)
Focus
autofocus
Focus range
±1 mm
Repeatability C.F.*:
*Values calculated from 30 consecutive measurements without interaction on connector between measurements (connector fixed).
ROC: 0.2 %
Fiber Height: 0.5 nm
Angles: 0.007 deg
Apex Offset: 0.6 µm
Repeatability C.R.*:
*Values calculated from 30 consecutive measurements without interaction on connector between measurements (connector fixed).
ROC: 0.2 %
Fiber Height: 0.4 nm
Angles: 0.0002 deg
Apex Offset: 0.02 µm

Accessories

See them on Accessories page

Sample Images